{"id":159,"date":"2020-07-22T15:59:52","date_gmt":"2020-07-22T15:59:52","guid":{"rendered":"http:\/\/www.lumel.co.uk\/blog\/?p=159"},"modified":"2020-07-22T15:59:54","modified_gmt":"2020-07-22T15:59:54","slug":"installation-is-the-reverse-of-removal","status":"publish","type":"post","link":"https:\/\/www.lumel.co.uk\/blog\/installation-is-the-reverse-of-removal\/","title":{"rendered":"Installation is the reverse of removal"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">&#8220;Installation is the reverse of removal&#8221; is a familiar phrase to anyone who&#8217;s read a Haynes manual.  It usually appears at the end of a set of long and complicated instructions about removing something oily and can be translated as: &#8220;putting it back on is just as hard and complicated as taking it off. Good luck!&#8221;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">With the bike back, it&#8217;s now time to re-build.  So far there haven&#8217;t been too many issues.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">First up was the bottom bracket and cranks.  These went on like a dream, the replacement BB cup and cone fitting perfectly after I&#8217;d cleaned up the shell threads.  The axle went in, the cranks went on, followed by the pedals; it was pretty much perfect.<\/p>\n\n\n\n<div class=\"wp-block-jetpack-slideshow aligncenter\" data-effect=\"slide\"><div class=\"wp-block-jetpack-slideshow_container swiper-container\"><ul class=\"wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper\"><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"768\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-149\" data-id=\"149\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8016-1024x768.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8016-1024x768.jpg 1024w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8016-300x225.jpg 300w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8016-768x576.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8016-1536x1152.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8016-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure><\/li><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"768\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-150\" data-id=\"150\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8017-1024x768.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8017-1024x768.jpg 1024w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8017-300x225.jpg 300w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8017-768x576.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8017-1536x1152.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8017-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure><\/li><\/ul><a class=\"wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white\" role=\"button\"><\/a><a class=\"wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white\" role=\"button\"><\/a><a aria-label=\"Pause Slideshow\" class=\"wp-block-jetpack-slideshow_button-pause\" role=\"button\"><\/a><div class=\"wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white\"><\/div><\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\">I then fitted the headset.  The interface between the headset cup races and the frame is snug and this is rather important.  Play here will lead to wear on the interface; the very thing the bearings are there to avoid!  To fit the races, one typically uses a bearing press such as the Park Tools HHP-2, which retails for \u00a3140.  Being a cheapskate, I made my own, using:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>An M8 threaded rod (M8x1000 but  M8x250 would do just fine)<\/li><li>Two M8 nuts<\/li><li>Four M8x50 penny washers<\/li><li>Two M8x25 penny washers<\/li><\/ul>\n\n\n\n<div class=\"wp-block-jetpack-slideshow aligncenter\" data-effect=\"slide\"><div class=\"wp-block-jetpack-slideshow_container swiper-container\"><ul class=\"wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper\"><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-160\" data-id=\"160\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8040-1-768x1024.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8040-1-768x1024.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8040-1-225x300.jpg 225w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8040-1-1152x1536.jpg 1152w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8040-1-1536x2048.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8040-1-scaled.jpg 1920w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure><\/li><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-161\" data-id=\"161\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8043-1-768x1024.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8043-1-768x1024.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8043-1-225x300.jpg 225w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8043-1-1152x1536.jpg 1152w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8043-1-1536x2048.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8043-1-scaled.jpg 1920w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure><\/li><\/ul><a class=\"wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white\" role=\"button\"><\/a><a class=\"wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white\" role=\"button\"><\/a><a aria-label=\"Pause Slideshow\" class=\"wp-block-jetpack-slideshow_button-pause\" role=\"button\"><\/a><div class=\"wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white\"><\/div><\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\">Thread the contraption through the head tube and tighten with trusty pair of spanners.  I first tried with just the nuts and 50mm penny washers; the force exerted was enough to bend the washers!  I suspect the new paint was thicker than the old, which won&#8217;t have helped.  Using two of them, and spreading the load with a 25mm washer did the trick.  Cups inserted!<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If I was doing it again, I might be tempted by an M10 (or even M12) setup.  M8 worked, but I did put a<em> lot <\/em>of force through those threads.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">With the cups in, I mounted the forks and applied the headset.  Lovely.  While I was looking at the frame, I needed to check the rear dropouts were aligned; these should both be pointing straight forward.  Again, the usual tool for this is a Park Tools FFG-2 which retails for a hundred quid; again, you can make your own.  I used:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Two M8x200 carriage bolts<\/li><li><span style=\"font-size: 1rem;\">Two M8x50 penny washers<\/span><\/li><li>Four wingnuts<\/li><li>Four M8x16 (ish) washers<\/li><li>Two nuts<\/li><li>Two locknuts<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Incidentally, the cost for all these tools was under a tenner.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The procedure is: lock the tools in as per the picture; use the leverage of the carriage bolt to line up the penny washers.  It&#8217;s slightly trickier than with the proper tool, which effectively has <a href=\"https:\/\/www.parktool.com\/blog\/repair-help\/dropout-alignment\">two sockets you perfectly match up<\/a>; but it&#8217;s an awful lot cheaper!  Mine were pretty good; the photo shows the pre-adjustment alignment.  Not too much tweaking at all and I&#8217;d have been gutted to spend a hundred pounds.<\/p>\n\n\n\n<div class=\"wp-block-jetpack-slideshow aligncenter\" data-effect=\"slide\"><div class=\"wp-block-jetpack-slideshow_container swiper-container\"><ul class=\"wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper\"><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-156\" data-id=\"156\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8045-768x1024.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8045-768x1024.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8045-225x300.jpg 225w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8045-1152x1536.jpg 1152w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8045-1536x2048.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8045-scaled.jpg 1920w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure><\/li><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"768\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-155\" data-id=\"155\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8044-1024x768.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8044-1024x768.jpg 1024w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8044-300x225.jpg 300w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8044-768x576.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8044-1536x1152.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8044-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure><\/li><\/ul><a class=\"wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white\" role=\"button\"><\/a><a class=\"wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white\" role=\"button\"><\/a><a aria-label=\"Pause Slideshow\" class=\"wp-block-jetpack-slideshow_button-pause\" role=\"button\"><\/a><div class=\"wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white\"><\/div><\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\">With the frameset done, brakes were next.  I had found a set of brand new 1990s Campagnolo Record dual pivot calipers.  Technically, they still have a three year warranty.  They&#8217;re lovely, although they are significantly heavier than my previous Weinmanns.  A new length of outer slipped through the top tube really easily &#8211; I&#8217;ve heard it can be a nightmare but no dramas here.  A couple of new cables and the braking system is done!<\/p>\n\n\n\n<div class=\"wp-block-jetpack-slideshow aligncenter\" data-effect=\"slide\"><div class=\"wp-block-jetpack-slideshow_container swiper-container\"><ul class=\"wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper\"><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-151\" data-id=\"151\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8034-768x1024.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8034-768x1024.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8034-225x300.jpg 225w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8034-1152x1536.jpg 1152w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8034-1536x2048.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8034-scaled.jpg 1920w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure><\/li><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-152\" data-id=\"152\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8037-768x1024.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8037-768x1024.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8037-225x300.jpg 225w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8037-1152x1536.jpg 1152w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8037-1536x2048.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8037-scaled.jpg 1920w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure><\/li><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"768\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-158\" data-id=\"158\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8053-1024x768.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8053-1024x768.jpg 1024w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8053-300x225.jpg 300w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8053-768x576.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8053-1536x1152.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8053-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure><\/li><\/ul><a class=\"wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white\" role=\"button\"><\/a><a class=\"wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white\" role=\"button\"><\/a><a aria-label=\"Pause Slideshow\" class=\"wp-block-jetpack-slideshow_button-pause\" role=\"button\"><\/a><div class=\"wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white\"><\/div><\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\">The last major system is the drivetrain &#8211; read: gearing &#8211; and finishing kit.  The front mech is on; the rear is on the way.  It will need a new hanger, which <a href=\"https:\/\/www.thecycleguy.co.uk\/\">Keith The Cycle Guy<\/a>  sorted for me when I popped in for some brake cables. Then it&#8217;s just a case of fitting the gear levers &amp; cables and tuning the thing.  Maybe I should go fixie after all&#8230;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>&#8220;Installation is the reverse of removal&#8221; is a familiar phrase to anyone who&#8217;s read a Haynes manual. It usually appears at the end of a set of long and complicated instructions about removing something oily and can be translated as: &#8220;putting it back on is just as hard and complicated as taking it off. Good luck!&#8221; With the bike back,<\/p>\n","protected":false},"author":1,"featured_media":150,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_hide_featured_image":false,"_jetpack_featured_image_duplicate_dismissed":0,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[21],"tags":[30,14,55,58,26,59,53,56,57],"class_list":["post-159","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-bike-rebuild","tag-bearings","tag-bike","tag-brakes","tag-diy","tag-forks","tag-hack","tag-headset","tag-race","tag-tools"],"jetpack_sharing_enabled":true,"jetpack_featured_media_url":"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/07\/IMG_8017-scaled.jpg","_links":{"self":[{"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/posts\/159","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=159"}],"version-history":[{"count":1,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/posts\/159\/revisions"}],"predecessor-version":[{"id":162,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/posts\/159\/revisions\/162"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/media\/150"}],"wp:attachment":[{"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=159"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=159"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=159"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}