{"id":170,"date":"2020-08-01T22:15:01","date_gmt":"2020-08-01T22:15:01","guid":{"rendered":"http:\/\/www.lumel.co.uk\/blog\/?p=170"},"modified":"2020-08-01T22:26:17","modified_gmt":"2020-08-01T22:26:17","slug":"a-frustrating-fitting-dismay-me-gears-are-not-the-cream-of-the-crop","status":"publish","type":"post","link":"https:\/\/www.lumel.co.uk\/blog\/a-frustrating-fitting-dismay-me-gears-are-not-the-cream-of-the-crop\/","title":{"rendered":"A Frustrating Fitting (Dismay-me Gears are not the Cream of the crop)"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">A few days ago, I had a bash at one of the last major parts of the build: the gear system.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I&#8217;ve selected a Campag 7-speed setup, mainly because the were about the last of the downtube shifters before everything went onto the levers.  However, despite looking mint, there are a series of problems.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8089-768x1024.jpg\" alt=\"\" class=\"wp-image-171\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8089-768x1024.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8089-225x300.jpg 225w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8089-1152x1536.jpg 1152w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8089-1536x2048.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8089-scaled.jpg 1920w\" sizes=\"auto, (max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<ol class=\"wp-block-list\"><li>The left lever (front mech) went on fine and works &#8211; mostly &#8211; a treat.  Pushing the lever forward unscrews the tightener though, which means next time I pull it back it doesn&#8217;t stick.  I suspect this could be fixed with thread lock but I haven&#8217;t tested yet.<\/li><li>The right lever (rear mech) has a litany of issues.  Firstly, the indexing mechanism works by engaging a spring into a rotating ratchet to hold each gear.  Fine, except the previous owner has glued the springs to make it permanently friction-based, not index-based.  That&#8217;s annoying and it&#8217;s too late to return it.<\/li><li>It turns out my bosses are slightly longer than required &#8211; or there&#8217;s a washer missing.  Consequently the lever body moved laterally which meant there was no friction whatsoever which is rather important in a friction-based lever. <\/li><\/ol>\n\n\n\n<div class=\"wp-block-jetpack-slideshow aligncenter\" data-effect=\"slide\"><div class=\"wp-block-jetpack-slideshow_container swiper-container\"><ul class=\"wp-block-jetpack-slideshow_swiper-wrapper swiper-wrapper\"><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-172\" data-id=\"172\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8090-768x1024.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8090-768x1024.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8090-225x300.jpg 225w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8090-1152x1536.jpg 1152w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8090-1536x2048.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8090-scaled.jpg 1920w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure><\/li><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-173\" data-id=\"173\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8092-768x1024.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8092-768x1024.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8092-225x300.jpg 225w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8092-1152x1536.jpg 1152w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8092-1536x2048.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8092-scaled.jpg 1920w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure><\/li><li class=\"wp-block-jetpack-slideshow_slide swiper-slide\"><figure><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"768\" alt=\"\" class=\"wp-block-jetpack-slideshow_image wp-image-174\" data-id=\"174\" src=\"http:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8093-1024x768.jpg\" srcset=\"https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8093-1024x768.jpg 1024w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8093-300x225.jpg 300w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8093-768x576.jpg 768w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8093-1536x1152.jpg 1536w, https:\/\/www.lumel.co.uk\/blog\/wp-content\/uploads\/2020\/08\/IMG_8093-2048x1536.jpg 2048w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure><\/li><\/ul><a class=\"wp-block-jetpack-slideshow_button-prev swiper-button-prev swiper-button-white\" role=\"button\"><\/a><a class=\"wp-block-jetpack-slideshow_button-next swiper-button-next swiper-button-white\" role=\"button\"><\/a><a aria-label=\"Pause Slideshow\" class=\"wp-block-jetpack-slideshow_button-pause\" role=\"button\"><\/a><div class=\"wp-block-jetpack-slideshow_pagination swiper-pagination swiper-pagination-white\"><\/div><\/div><\/div>\n\n\n\n<p class=\"wp-block-paragraph\">I eventually stopped it rattling by placing an M8 washer over the boss. It was a little small but nothing that a file couldn&#8217;t sort out.  You can see it in the second picture.  Unfortunately, this makes another metal-on-metal interface which gives twice the opportunity to slip; and slip it does!<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Finally, when on the inner ring, the chain rubs against the outer ring in four out of seven gears.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I am quite annoyed and don&#8217;t know how to proceed.  My current plan of attack for each side, and in ascending order of cost, is&#8230;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Left Hand Side (front mech):<\/p>\n\n\n\n<ol class=\"wp-block-list\"><li>Use threadlock on the bolt and degrease the friction plates.<\/li><\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Right Hand Side (rear mech):<\/p>\n\n\n\n<ol class=\"wp-block-list\"><li>Use acetone to dissolve whatever is holding the springs, returning it to index-based shifting.<\/li><li>Use friction paste (like that used for seat posts) on the washer faces to see if that gives enough grip. Chance of success low and I&#8217;d still have no indexing but at least I already have all the parts.<\/li><li>Assuming the LHS is working, buy a friction-based RH lever. These are fairly affordable, can match and, if I accept no indexing, would be fine.  <\/li><li>Buy another set of the same. Maybe there&#8217;s a part missing.  Afterwards, compete in the Tokyo 2020 straw-clutching competition.<\/li><li>Abort 7sp and find a set of 8sp levers and an 8sp cassette. I&#8217;d also need to find a guide that takes the cable around the bosses; these are readily available and as a bonus tend to have inline barrel adjusters to keep the tension right.  This feels like compromising on the vision; however, is probably the better <em>technical <\/em>solution.<\/li><\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Chain Rub:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Buy an 8 speed chain. My current one is 6sp so is considerably wider than it needs to be.  This should work with any of the options above.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Given received wisdom seems to be that Syncro \/ Syncro II were both abject failures, I&#8217;m leaning towards 3.3, which is a shame because those downtube levers look really good.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>A few days ago, I had a bash at one of the last major parts of the build: the gear system. I&#8217;ve selected a Campag 7-speed setup, mainly because the were about the last of the downtube shifters before everything went onto the levers. However, despite looking mint, there are a series of problems. The left lever (front mech) went<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_hide_featured_image":false,"_jetpack_featured_image_duplicate_dismissed":0,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[21],"tags":[38,61,62,63,60],"class_list":["post-170","post","type-post","status-publish","format-standard","hentry","category-bike-rebuild","tag-bike-rebuild","tag-failure","tag-frustration","tag-gears","tag-syncro-ii"],"jetpack_sharing_enabled":true,"jetpack_featured_media_url":"","_links":{"self":[{"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/posts\/170","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=170"}],"version-history":[{"count":3,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/posts\/170\/revisions"}],"predecessor-version":[{"id":177,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/posts\/170\/revisions\/177"}],"wp:attachment":[{"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=170"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=170"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.lumel.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=170"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}