All about the paint

Busy couple of weeks.

Firstly, I tried to paint my white stem black. I sanded back all the loose and lumpy paint, keyed it, then gave it two very careful coats of Hammerite’s best. Not exactly mint but good enough for me. Or so I thought.

Next, the call came from Vapour Blasting Northants – my frame and forks were finished! A hundred notes later and they were in the back of the car, safely bubble-wrapped up. The colour is pretty much spot on… really pleased with their work so far.

At this point I’ll introduce my planned colourway. It blends a bit of cycling tradition – the bands – with a bit of something that’s dear to me – the Black, Green and Gold.

I have a green frame and forks; the question is how to add the black downtube band and the gold!!

I asked the paintshop about the black band and the owner suggested vinyl wrap. Not convinced but as a low-risk option that sounded good to me. I can always try something later if it doesn’t work out.

The gold is more difficult. A key part is the headset. My old headset was janky so I decided to junk it in and replace it with a new one from eBay. Slightly annoyed as what I’ve received does not match what I ordered but for a fiver it’s good enough. Painting it on the other hand is difficult. Some very kind friends have explained the theory on how to achieve this magical transformation and regrettably I’m just totally lost. I may just leave the thing back. It does look pretty smart.

The gold on the downtube could be achieved in a kludge with a piece of electrical tape. It feels naff but would do as a temporary bodge. If anyone reading is able to paint a headset and downtube band in exchange for a box of beer, please drop me a line…

I offered up the headset to the frame; black on green looks good, I’m not going to lie. However, I also tried to pop my newly painted stem in, only to find that the stem:headset interface was precise and a couple of layers of paint were too much. So I bought a new one. It’s smarter and weighs a gramme less (honestly, that’s probably the weight of the paint).

I’m really pleased with how everything is coming together. If I were to abandon the Difficult Gold, I could start reassembly. It’s a tricky decision to make.

It’s my birthday soon (yay!) so I’ve preemptively spent some of my presents on a pair of 90s Campagnolo Record callipers. Sadly, only DualPivot and not the gorgeous Delta brakes from the 90s; I draw the line at £350 for a set of callipers! One could buy a very nice second hand carbon bike for that. I’m also out of freely squintable money so I’ll use my current Cane Creek SCR-5 levers. They’re black and look the business so that’s fine. I have new gear cables and outers so I can fit the bars and braking system as soon as the callipers arrive. That leaves the drivetrain.

The drivetrain is mixed bag. I have everything I need for a single-speed (BB axle, cups, bearings, cranks, chainrings, cassette) but making it change gear requires more of the shiny. I have shifters but need both front and rear derailleurs and this is in a world where a rear derailleur mounting bolt can cost £35. I could save quite a few bob by dropping to Chorus but… it just feels wrong!

I’ve also found I need to make a bearing press. The interface between the head tube and the two races is snug. It took some effort to take the original off and I suspect it’ll take some effort, gently but firmly applied, putting the replacements on. A proper press is expensive but it should be easy enough to Heath Robinson one up with a coachbolt, some large washers and a couple of nuts.. Watch this space…