Forks In

So, forks. After much deliberation, watching youtube and the thought of flexing my puny cyclist arms against forged steel, I decided to abandon the idea and buy new ones. I managed to find the sole auction for a set of 1″ threaded forks with a steerer over 207mm and hit ‘buy’.

They’re made from Columbus SL tubing (apparently “the Italian Reynolds”) and have a lovely bladed profile to them. They’re currently painted in a really dodgy carbon fibre-effect so they’ll be joining the frame in the blasters and coaters. Seriously. Who’d put carbon effect on a steel road fork?

Dodgy carbon effect aside, I’m really pleased. They’re apparently new; the general condition bears that out, particularly the brake mounting point. They don’t have the chunky shoulder pads I was hoping for but the blades more than make up for that.

Of course, I had to weigh the two. For once, there is real daylight between the two components. 151g. I mean, that’s enough for me to eat almost three Mars bars and still be ahead. Ventoux watch out.

I also made a decision on the frame. I’ not going to try and cold set it. It is wonky but it rides just fine and that’s what I’m going to be calling “character”.

With the forks in and frame ready, I can take the next step. I’ve booked them in with Vapour Blasting Northants to be vapour blasted and powder coated and will be dropping them off tomorrow morning after the school run. I’ve kindly been given the right Pantone colour, found a dodgy Internet site which reckons it’s found the nearest RAL code and apparently that’s what I need for paint. We’ll see how it turns out next week!

Chainsets and Shifters

It’s been a quiet time on the bike. A couple of bits have arrived though.

Firstly, the Campag chainset. Fairly easy to assemble and arrived in really good condition. It weighed a mere 826g compared to the Shimano’s 878g. That’s a 52g saving which, I think you’ll agree, will help on the Pyrenees. For comparison, a modern Shimano Ultegra chainset weighs 674g and a Campag Chorus chainset 684g. The majority of this I would assume is owing to the carbon fibre construction.

Secondly was the shifters, which arrived separate. It’s a bit like a jigsaw without the lid. Weight-wise, a whopping gramme lies between them. Comparison with modern components is difficult as latterday shifters are combined with levers. However, as more components arrive (and are removed), we ought to be able to construct a picture.

Speaking of construction… the jigsaw. Happily, lots of other people on the Internet have had the same problem. I’m going to put tow links here so I at least can find them later:

A final detail: the crank bolts are just that; not nuts. This means that I cannot reuse the spindle I had previously. Options are to find a comparable Campagnolo spindle or to buy a new sealed cartridge bottom bracket. Acquiring a decent spindle shouldn’t be too much of an issue; there are plenty about, albeit overseas. There are also vintage sealed cart BBs. So many decisions!

Stripdown

Stripping down a bike is fun. There’s always just one more thing to do! Indeed I got so involved that I missed my window of actually riding which was annoying. I didn’t set out to strip it; I set out to remove the forks so I could see exactly what I needed. But one thing led to another, and well… most of the components are now off. All I need now is a crank puller so I can pull some cranks. One’s been on the way for a week.

Things I found:

  • 30+ years gathers a lot of crud. Mental note for the future: make sure I clean my bike regularly. Removing the front derailleur was horrendous and the bottom jockey wheel on the rear didn’t actually spin.
  • The brake cables were fine (IIRC I replaced these about 200 miles ago). The gear cables had so much slack I’m surprised they shifted at all.
  • Nut sizes in the 80s were variable to say the least. Imperial? Metric? Let’s have a bit of everything!
  • My best friend was the adjustable spanner and a block of wood.

So, the fork is a 1″ threaded fork with 8″ steerer for 700c wheels. And I really want one with the big 80s shoulderpads. To e-bay!

… where I might have already found a Campagnolo Record chainset for sale. Probably shouldn’t have hit ‘buy’ but there’s nothing like shiny hardware lying around to motivate…